Sleeve Shaping Tracker
Track sleeve increases or decreases.
How Sleeve Shaping Tracker Works?
The Sleeve Shaping Tracker works by counting Sleeve Round and holding the next taper round in Next Taper Round. Sleeves taper with paired decreases from upper arm to cuff, or paired increases from cuff to upper arm.
Find the interval
Use the formula below to find the rounds between shaping rounds.
Set the next taper round
Press → to set Next Taper Round.
Count sleeve rounds
Tap the count pad or press Space as each sleeve round ends.
Shape and advance
Work the paired shaping at the target round, then raise Next Taper Round by the interval.
Sleeve Shaping Tracker Formula
The Sleeve Shaping Tracker formula is interval = taper rounds ÷ shaping rounds, where shaping rounds = (upper arm stitches − cuff stitches) ÷ 2.
- Shaping rounds
k = (U − C) ÷ 2U is upper arm stitches and C is cuff stitches.
- Interval
i = T ÷ kT is the rounds available for tapering.
- Taper length
T = taper length × gg is rounds per inch.
Worked example: A sleeve from 64 stitches at the upper arm to 44 at the cuff needs (64 − 44) ÷ 2 = 10 shaping rounds. Over 15 in (38.1 cm) at 6 rounds per inch, that is 90 ÷ 10 = every 9th round.
Sleeve Shaping Tracker Conversion Table
The Sleeve Shaping Tracker conversion table gives the decrease interval for 4 sleeve sizes over a 15 in (38.1 cm) taper at 6 rounds per inch.
| Upper arm sts | Cuff sts | Shaping rounds | Interval |
|---|---|---|---|
| 52 | 40 | 6 | every 15 rnds |
| 60 | 44 | 8 | every 11 rnds |
| 64 | 44 | 10 | every 9 rnds |
| 72 | 48 | 12 | every 7 rnds |
| 80 | 52 | 14 | every 6 rnds |
| 88 | 56 | 16 | every 5 rnds |
Round the interval down and work any spare rounds plain at the cuff end.
What is Sleeve Shaping Tracker?
A Sleeve Shaping Tracker is a tool that tracks rounds and taper points on a knitted sleeve. Sleeves narrow toward the wrist, and the taper is spread over the sleeve length in even steps.
Two sleeves need identical tapers. The tracker records the next shaping round, so the second sleeve follows the same plan.
The Stitches Counter tool saves the round and next taper round in your browser.
What are the uses of Sleeve Shaping Tracker?
There are 4 main uses of the Sleeve Shaping Tracker, including top-down sleeves, bottom-up sleeves and bell sleeves.
Top-down sleeves
Decrease from underarm to cuff.
Bottom-up sleeves
Increase from cuff to upper arm.
Bell sleeves
Increase toward the cuff for a flared shape.
Matching pairs
Copy the plan to the second sleeve.
About the Sleeve Shaping Tracker
Track tapering sleeve decreases from underarm to cuff (or increases from cuff to bicep) with exact round intervals.
How to Use This Tool Efficiently
- ✓Knit both sleeves two-at-a-time or log each decrease round to prevent mismatched arm lengths.
- ✓Place a marker at the underarm seam center to anchor your paired decreases.
Browse All Stitches Counter Tools
Explore all 132 specialized counters, calculators, and trackers in our collection.